I am writing this post in hope that it will help some people.
The issue is that an HP Officejet PRO 8500A A910 shows as offline when you open the print queue dialog (in the caption it just says "HP Officejet PRO 8500A A910 - offline"), other then that I had network connectivity, ping, web interface was reachable and so on, It just would not print....
I have seen very long threads where people complain that their HP Officejet PRO 8500A A910 went offline and nothing helped.
They got many types of advice like switching from wireless to USB, changing IP and other network settings, disabling Power save mode , restart the printer or related router, use a different power cable and so on...
For me It turned out that the problem was that the cyan ink cartridge was just too old (two years and two months actually... - looks like I am not printing enough sea images...).
Changing the expired cartridge resolved the issue and the printer just came back online.
So how can you tell if that is the case with you ?
In the printer screen , press the ink icon (the one with the cyan, magenta, yellow & black circles on the top right).
You should see a yellow exclamation sign next to at least one of your ink cartridges.
Press the "More..." button and use the side arrows to brows through the cartridges.
If a cartridge is expired it will say so on the top line of the screen (above the ink level indicator).
Replace the expired cartridge and leave me a comment...
Eyal
1/1/2019: UPDATE (Another solution if the above is not the case for you):
[READ, BUT DONT DO THIS until you read the update below]
This was originally posted on Feb 5th 2106,
It is now Jan 1st 2019, and my printer went offline again....
I did remember that I have bloged about this in the past so I came back here,
only this time the cartridges seem o.k.
so I did some more reading and finnaly arrived at THIS LINK which had the sollution to my current "HP Officejet Pro 8500A Plus is offline" problem.
To sum up:
go to the printer properties, open the ports tab and press the configure port button.
then remove the check box from "SNMP Status Enabled".
printer should go online after you press "OK" and "Close".
I must add here the at first it did not wat to save my change and I deleted all the print jobs from the spooler and tried again and then it saved without a problem.
1/1/2019: UPDATE 2
well, I was too quick to go and blog about this,
although it did remove the offline notice on the printer,
the printer remained unavailable for printing,
digging further, it turned out that I did not have connectivity to my printer... (a cable got loose)
so, I now believe that what you should do if its not a cartridges issue is the following:
press the network icon on your printer, it should show the printer's IP address, try to ping it,
if it does not work... well, test all your cables...
personally I went beck to the SNMP checkbox and turned it back on...
Monday, May 02, 2016
HP Officejet PRO 8500A A910 offline - Problem solved.
Monday, August 04, 2014
Capacity calculation and planning using X-RAID2 with Dual redundancy
I have a RedayNAS Ultra 6 Plus that I initially configured with 6 2TB drives X-RAID2 and Dual redundancy. This gave me 8TB of space (which I never took the time to even try and understand why).
Recently I started getting SMART+ warnings about one of those drives and decided to replace it.
I remembered this animation of extending X-RAID2 and because My drive was already at 87% I decided to buy not one but two new 3TB drives expecting my capacity to grow by an additional 1TB.
As it turns out this was not the case.
At first I thought there was an issue with the expansion process not being triggered triggering so I tried to check the check the box titled "Check and fix quotas on next boot. This process can take several minutes to more than an hour depending on disk capacity and the number of files on your volume." as was recommended somewhere but this also did not work.
finally reading through the forums I found the following explanation:
X-RAID2 dual-redundancy uses RAID-6 layers. RAID-6 layers require a minimum of four disks.
So how do you calculate capacity for a given set of hard drives configured for X-RAID2 DR (Dual redundency) ?
first of all - you MUST have 4 drives to use Dual redundancy.
now, look at the smallest drive and suppose it has size S1.
count how many drives have at least S1 (lets call this N1).
if N1>=4 then add to expected total capacity S1*(N1-2).
now repeat with "un-accounted-for space" on all drives.
e.g.
Suppose you have the following drives 1TB , 1TB , 2TB , 2TB, 3TB , 4TB
The smallest one would be 1TB and we have 6 drives with that "un-accounted-for" space on them,
so 1TB*(6-2) yields 4TB and leaves you with 0TB,0TB,1TB,1TB,2TB,3TB "un-accounted-for" space.
next we consider another 1TB layer on the last 4 drives that yields 1TB*(4-2) = 2TB more and leaves you with 0TB,0TB,0TB,0TB,1TB,2TB "un-accounted-for" space.
So what if you now want to get more space? the first layer is "full" (i.e. it uses 1TB of all 6 drives) but the second layer can be expanded in several different ways with the minimal one being just expanding one of the first two drives by an additional 1TB and thuse getting 1TB*(5-2) = 3TB for that layer.
This was about calculating... you should now be able to do some planning by your self.
As for me, after understanding the situation I am at 2TBx4+3TBx2 yielding 8TB I thing the future expansion path would be by first replacing two more of the 2TB drives to 4TB each, this will give me an additional 2TB (try to calculate it yourself - 2TB,2TB,3TB,3TB,4TB,4TB) - then continue like this to each time replace the small pair to become the new largest pair.
The advantage is that from now on I will only need to replace two HDs each time to get additional space.
The disadvantage is that I some of the additional space I pay for will only be used when I buy the next pair of HDs.